Your Blodgett oven is supposed to keep the kitchen moving and bring revenue, not leave you scrambling when the pilot light goes out. The problem of the flame not staying lit is frustrating but quite common in professional kitchens, and the good news is that it’s very often not that hard to fix. The possible causes range from a restricted airflow, which is easy to address, to a worn thermocouple, which is quite a widespread problem, to a faulty safety valve that may need replacing. This guide walks you through why your gas oven pilot light keeps going out and what you can do to fix it, including when you need the right Blodgett parts to get the repair job done.
5 Common Reasons a Blodgett Oven Pilot Light Keeps Going Out
It helps to understand how the pilot system works in the first place. The pilot flame heats a thermocouple (a small metal sensor), which generates a tiny electrical signal that holds the gas safety valve open. The moment that signal weakens or disappears for any reason, the valve snaps shut, the gas cuts off, and the pilot goes out.
That chain of events has five common weak links. Here’s how to spot which one is breaking yours.
1. Dirty or Restricted Pilot Burner
Grease and airborne debris can clog the pilot burner orifice opening and restrict gas flow. This way, the flame may grow weak. Why does that matter?
Because the pilot flame must provide enough heat to keep the thermocouple working. If the flame isn’t reaching the sensing tip properly, the safety valve may shut off the gas even though the pilot initially lights. Additional symptoms include the pilot taking longer to light and the flame looking weaker.
Oftentimes, cleaning grease buildup helps. A technician determines whether cleaning or replacing the pilot burner is necessary. Never insert any wires or drill bits into the pilot opening. Enlarging it beyond the calibrated size affects the gas-air mixture.
2. Faulty or Poorly Heated Thermocouple
Does your Blodgett oven pilot go out when you release the button? The thermocouple may need replacing, or you’re not holding the safety button long enough. Certain 1048 and 900 Series ovens specify holding the button for 30 seconds after the pilot lights.
The job of the thermocouple is to sense that the flame is present and signal the gas valve to stay open. If the thermocouple can’t generate a sufficient electric signal, the valve closes and the flame goes out.
The problem may come from a worn thermocouple (it lasts several years in commercial kitchens), poor positioning relative to the flame, or a pilot flame that’s too weak to heat it properly.
A tech tests the thermocouple output with a multimeter. A healthy thermocouple should read in the range of 25 to 35 millivolts. Anything significantly lower means it’s time for a replacement.
3. Malfunctioning Pilot Safety Valve
Here’s another possibility: the flame is strong, the thermocouple is working, but the pilot still refuses to stay lit. That’s when an oven safety valve becomes a suspect. Its job is to stop gas flow when the pilot flame is lost. But a malfunction can prevent the valve from staying open even in normal flame conditions.
Older Blodgett ovens may have different valve designs. Some configurations require specific upgrade kits rather than a direct replacement of the original component.
4. Low or Fluctuating Gas Pressure
Proper gas supply is paramount to a steady flame. If it drops, be it due to a regulator, the supply piping, or changes in gas demand elsewhere in the kitchen, the flame may weaken or go out.
Signs of a gas pressure problem:
- The pilot light goes out during busy service times but seems fine in the morning when fewer appliances are running.
- The pilot flame looks unusually small or yellow even after you’ve cleaned the orifice.
- You’ve noticed other gas appliances in your kitchen have the same problem.
5. Poor Ventilation or Drafts Around the Oven
This one is easy to overlook because the pilot assembly may be perfectly fine.
Blodgett gas deck ovens need adequate combustion air and properly functioning ventilation. If airflow is restricted or drafts disturb the pilot flame, the oven may experience repeated pilot outages.
Blodgett specifically states in its guidance for the 1048 Series that insufficient secondary air is one possible reason the pilot goes out. So before assuming you need replacement parts, take a closer look at the oven’s surroundings – like some boxes or equipment recently placed near the ventilation openings.
Final Word: Keep Your Oven Running with Proper Maintenance
When well-serviced and well-maintained, Blodgett ovens withstand anything commercial kitchens throw at them for decades. The pilot light system is one of the few high-wear areas that needs attention from time to time. Clean the pilot burner area during every scheduled cleaning cycle. Inspect the thermocouple alignment if you notice the pilot flame starting to look weak or inconsistent. And if the time has come to replace some malfunctioning components, make sure you’re sourcing your replacements from a trusted source that knows commercial food service equipment.

